Fits Ford F-150 · 5.5 ft Bed
Aosky Retractable Hard Tonneau Cover — Ford F-150
Aluminum slats with a matte black powder-coat finish, built for the F-150’s 5.5 ft bed. The dual-lock design secures the cover at both ends, and it slides open with one hand — no need to lower the tailgate. Mounts with clamps — no drilling required.
Shop This CoverOverview
This retractable cover is built for the F-150’s 5.5 ft bed using heavy-duty aluminum slats connected on a flexible spine. Open the lock and the cover slides smoothly along the side rails toward the cab, giving you full, unobstructed bed access without removing anything or lowering the tailgate.
The dual-lock design secures the cover at both ends rather than a single latch point, and the integrated sealing and drainage system is built to keep the bed dry through rain, snow, and even a truck wash. The matte black powder-coat finish resists scratches, marks, and corrosion over regular use.
Fitment note: This cover is specifically engineered for 2015–2025 Ford F-150 trucks with a 5.5 ft bed. Measure your bed before ordering to confirm compatibility with your specific truck.
Built From
Aluminum Slats
Heavy-duty aluminum slats connect on a flexible spine, giving a rigid closed surface that curls smoothly into the low canister.
Matte Black Powder Coat
A dark matte finish resists scratches, marks, and corrosion over regular use.
Dual-Lock Design
A locking mechanism at both ends of the cover, not just a single latch point, for added security.
Integrated Sealing & Drainage
Built-in seals and a drainage system keep the bed dry in rain, snow, and truck washes.
Confirming Your F-150’s Fit
Bed length has to match exactly for the side rails and canister to seat correctly. This cover is built for the F-150’s 5.5 ft (66″) bed — measure your bed or check your owner’s manual before ordering, since the F-150 is also sold with 6.5 ft and 8 ft bed options depending on cab configuration.
How Installation Works
- Clean the bed rails. Wipe down the factory rail or mounting points where the brackets will attach.
- Attach the brackets. Install the included brackets at each mounting point per the instructions.
- Mount the canister and side rails. Position the canister at the front of the bed and run the side rails back to the tailgate.
- Clamp and torque. Hand-tighten the clamps, then torque them down evenly.
- Test the lock and slide. Open and close the cover fully to confirm the dual-lock engages and the slats move smoothly before your first drive.
Specifications
Why This Cover
- Dual-lock design secures the cover at both ends when closed
- Slides open with one hand — no need to lower the tailgate
- Integrated sealing and drainage keep the bed dry through rain, snow, and truck washes
- Clamp mounting means no drilling into the F-150’s bed
- Rated to support up to 500 lbs of evenly distributed weight
Frequently Asked Questions
Does this fit the 2015–2025 F-150?
Yes, this cover is specifically engineered for 2015–2025 Ford F-150 trucks with a 5.5 ft (66″) bed. Measure your bed to confirm compatibility before ordering.
Do I need to lower the tailgate to open it?
No. The cover slides open toward the cab and doesn’t require lowering the tailgate to operate.
Can I install this by myself?
Yes. Installation is DIY-friendly and typically takes 60–90 minutes with basic tools like a socket set and screwdriver. The package includes brackets and all hardware.
Will this work with a bed liner or tie-downs installed?
It’s compatible with most bed liners and tie-downs, as long as they don’t exceed the bed rail height where the side tracks mount.
What if the seal or lock ever wears out?
Seal kits and latch kits are sold separately in our Accessories lineup, so a worn part doesn’t mean replacing the whole cover.
Ready to Cover Your F-150 Bed?
Dual-lock security, aluminum slats, no-drill mount — fitted to your exact truck.
Shop This Cover